![]() ![]() Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Mainboard, in addition to the risk of burning your CPU, at higher Please be careful when using the fan control features of your Temperatures and sets the corresponding PWM outputs to the computed Reads its configuration from a file, then calculates fan speeds from Fancontrol - automated software based fan speed regulationįancontrol is a shell script for use with lm_sensors.Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe). Temperatures there will be a higher wearout of your other hardwareĬomponents, too. So if you plan to use these components in 50 years, Maybe you shouldn't use fancontrol at all. Slightly warmer, just be sure to have a temperature alarm and/or shutdownĬall, in case some fan fails, because you probably won't hear it anymoreįor easy configuration, there's a script named pwmconfig(8) In practice it doesn't seem to be a major issue, the fans will get Most fans aren't designed to be powered by a PWMed voltage. ![]() Various variables available for changing fancontrol's behaviour: Since most of you are going to use pwmconfig(8) script, theĬonfig file syntax will be discussed last.Īlternatively you can write this file yourself using the Which lets you interactively write your configuration file forįancontrol. INTERVAL This variable defines at which interval in seconds the main loop ofįancontrol will be executed DEVPATH Maps hwmon class devices to physical devices. This lets fancontrolĬheck that the configuration file is still up-to-date. DEVNAME Records hwmon class device names. ![]() FCTEMPS Maps PWM outputs to temperature sensors so fancontrol knows which The configuration file is still up-to-date. Temperature sensors should be used for calculation of new values for theĬorresponding PWM outputs. ![]() Thenįancontrol can check the fan speed and restart it if it stops FCFANS Records the association between a PWM output and a fan input. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |